# Dead Reckoning > Dead Reckoning builds everything factories, run by robots that can feel: one for each sector, each able to build any part in that sector to the customer's drawing without a dedicated line per part. Dead Reckoning owns and runs its wire harness factory, Bay Area Harness. In other sectors, such as actuator and battery pack assembly, the factory runs inside existing manufacturers on robots they rent from Dead Reckoning. San Francisco, California. ## Key facts - What it is: a San Francisco robotics company (Dead Reckoning Inc., a Delaware corporation) building tactile sensors, touch-trained robot models and factory orchestration software, and running them as everything factories. - Everything factory: a factory that builds any part in its sector to the customer's drawing, from a single prototype to production volume, by forming a temporary line of general-purpose robot cells for each order. - Why touch: the steps that decide whether a wire harness works (crimping, inserting terminals into connector cavities, routing wire, confirming each connector is seated) are contact-rich. Cameras can locate a connector but cannot tell whether it seated, so most harnesses are still built largely by hand. - Business model: owns and operates the wire harness factory (Bay Area Harness); rents robots (robots as a service) to manufacturers in other sectors. - Backed by Founders, Inc.; member of the NVIDIA Inception Program. - Contact: support@dreckoning.com. ## Factories - [Bay Area Harness](https://bayareaharness.com/) (F-01, owned, taking orders): custom cable assemblies and wire harnesses built to IPC/WHMA-A-620, one-piece minimum, free first sample, delivered across the San Francisco Bay Area in 48 hours. Send a drawing, a pinout or a photo of an existing cable. Contact: support@bayareaharness.com. - Actuator assembly (F-02, robots for rent, in development): motors, gearboxes and robot joints, including press-fits, magnets, bearings and seals. - Battery packs and more (F-03, robots for rent, planned): battery packs, sensors, enclosures. ## How the platform works 1. Drawing in: drawings, pinouts or a photo of an existing cable become one standard build spec, priced on the spot. 2. Plan: the orchestrator sequences the build and assigns each step to a free robot cell. 3. Cut, strip, crimp (touch): every terminal is crimped under force feedback. 4. Insert and route (touch): terminals are pushed into connector cavities until they lock; wire is routed and tied on the board. 5. Verify (touch): every connector seat is confirmed by feel and every circuit is electrically tested; each unit carries its own record. 6. Ship: delivered across the Bay Area in 48 hours. Three layers run every factory: the orchestrator (software), identical general-purpose robot cells with swappable tooling (hardware), and touch (tactile skin on every gripper plus touch models; a skill learned by one cell is shared with all). ## Research - [Proving Tactile is Necessary for Dexterous Manipulation](https://www.dreckoning.com/blog/tactile-is-necessary/): adding touch to a SmolVLA policy as another camera stream lowered success. Handing control to a separate tactile supervisor at contact raised grasp success on a deformable object from 39% to 83% (Fisher's exact test, p ≈ 0.015). ## Datasets - [pick_static_object](https://huggingface.co/datasets/leoliu49/pick_static_object): 40 SO-101 demonstrations with synchronized RGB and tactile streams. - [pick_static_object_notactile](https://huggingface.co/datasets/leoliu49/pick_static_object_notactile): the same episodes without the tactile stream. ## Pages - [Home](https://www.dreckoning.com/) - [Vision](https://www.dreckoning.com/vision) - [Blog](https://www.dreckoning.com/blog/)